Mold Remediation in a Finished Basement in Austell, GA: The Process Step by Step
Mold in a finished basement rarely looks dramatic. In this Austell, GA basement apartment the floors were new, the paint was clean and the kitchen was spotless. The problem was inside two closets, where moisture had soaked the drywall and mold had started growing behind it. Here is how our IICRC-certified crew handled it, step by step, with real photos from the job.

Step 1: Find the moisture before touching the mold
Mold is a moisture problem first. Before any demolition we take humidity and moisture readings inside and outside the home, so we know where the water is and how far it has traveled. On this job the outdoor air was reading 78% relative humidity, which is typical for a Georgia summer and exactly why below-grade rooms in Cobb County stay at risk.

Step 2: Contain the area
Disturbing moldy drywall releases spores. Before tear-out, doors, windows and openings are sealed with plastic sheeting and tape, and the work zone is kept under negative air pressure so nothing drifts into the rest of the home.

Step 3: Remove what cannot be saved
Drywall that is saturated and growing mold is not cleaned, it is removed. In the closet off the kitchen and in the primary bedroom closet we took the walls down to bare studs, bagged the debris inside the containment and hauled it off.

Step 4: HEPA vacuum and antimicrobial treatment
After removal, walls, ceilings and floors throughout the unit were HEPA vacuumed to capture settled spores, then treated with an antimicrobial agent. Skipping this step is the most common reason mold comes back after a cheap cleanup.
Step 5: Scrub the air and dry the structure
HEPA air scrubbers and negative air machines filtered the air while commercial dehumidifiers pulled moisture out of the framing. Lay-flat ducting carried the exhaust outside. We check the equipment readings on every visit and the machines stay until the structure is dry.


What this job included
Moisture and humidity readings
Mold testing
Containment barrier with zipper entry
Tear-out of mold-damaged drywall in two closets, down to the studs
HEPA vacuuming of walls, ceilings and floors
Antimicrobial treatment
HEPA air scrubbers, negative air and commercial dehumidifiers
Debris haul-off
Signs your basement may have the same problem
A musty smell that returns after cleaning
Peeling or bubbling paint low on the wall
Soft or stained drywall inside closets and behind furniture
Humidity that stays high even with the AC running
Mold remediation in Austell and Cobb County
House of Remodeling & Supply is an IICRC-certified, BBB A+ contractor based in Marietta. We handle mold remediation and the rebuild afterward, so you deal with one company from the first reading to the last coat of paint. We serve Austell, Mableton, Smyrna, Marietta, Kennesaw and the greater Atlanta area.
For a free estimate, call or text (770) 726-8820 or visit houseofremo.com.




Comments